TermDefinitionTags
3 way IntersectionWhere 3 (three) different points of the roof meet, otherwise known as a Mitre joint....
AbutmentThe sloping intersection of a roof surface against a vertical structure protruding through the roof ...
Angle GrinderElectric or petrol power tool for cutting large section tiles...
BargeboardA member usually of timber or PVC along the edge of a gable covering an external rafter or cut splay...
Battens(or Lathe or Lattes) Horizontal lengths of timber fixed to the roof rafters to support the slates or...
BeddingMortar or filling at ridge, hips or verges to close off the open joint....
Bow and Hand saws.Used to cut battens to length...
Brake Iron A spiked iron rod with pointed bottom edge used by slaters to cut and hole slates on the roof to sha...
Centre NailFixing of slates by nailing to battens slightly above the head of the slate in the preceding course....
Chalk LineA piece of cord or similar immersed in Red Roddle to strike / mark a line across the roof to mark ou...
ClipsClips have a similar purpose to nails but are used in a different way, in single lap tiles by securi...
Counter BattenLengths of timber battens fixed immediately beneath the slate or Tile batten directly over the rafte...
Crawling BoardTo enable the roofer to access working areas and particularly useful Board when carrying out repair ...
DormerA vertical protrusion through the roof slope normally a type of window....
EavesThe lower edge of an inclined roof slope....
Eaves Sprocket (Bellcast)A form of construction used at eaves by which short lengths of timber are fixed to the sides of raft...
Elevator slopewhich lifts tiles up to roof level, can be extended onto roof....
FasciaA length of timber or PVC fixed to the ends of the rafter feet, wall plate or brick face immediately...
FilletsAn old detail used at abutments of narrow widths of slate or tile bedded in cement at the angle of r...
FlashingA flexible material normally Lead to close off the joint between the roof covering and other surface...